Rust-Oleum Specialty Cement Spray Paint

Rust-Oleum Cement Spray Paint is an innovative aerosol that provides the natural look and feel of cement. This cement spray paint transforms any object to resemble solid cement, giving surfaces an authentic cement appearance.

Features of Our Cement Spray Paint

• Cement finish in aerosol spray
• Eliminates the need for heavy, messy concrete mixes
• Light gray color with a soft natural texture
• Covers 17-18 sq. ft. per can
• For indoor use only

For best results: For best results, a Rust-Oleum® primer can be used for surfaces such as bare wood and treated wood.

Instructions to Apply Our Cement Spray Paint

Surface Preparation: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy or porous surfaces. Remove any wax by lightly wiping surface with mineral spirits and let dry.

Application: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle, DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-12" from surface and spray in a steady back and forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart. Do not use near open flame.

For more information, please check the technical data sheet.