Rust-Oleum Specialty Triple Thick Glaze Spray

Rust-Oleum® Specialty Triple Thick Glaze Spray allows you to achieve a baked-glaze finish without the need for heat. This crystal-clear, extra-thick aerosol creates a glass-like coating that offers both decorative appeal and protective qualities.

Instructions to Use Our Specialty Triple Thick Glaze Spray

Surface Preparation: Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.

Application: Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 65% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist. Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle, DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 8-10" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart. Do not use near open flame.

For more information, please check the technical data sheet.