By giving its stability and low maintenance, ceramic tile is an excellent surface material for floors, tub, countertops and backsplashes. But, the wrong tile can provide your home a damaged, dated look that doesn't pretty suit with new appliances and decor.

Tips to Paint Ceramic Tile

As a replacement for of ripping out the tile and changing it, you may choose an easier, less costly solution, which is renovation of your home by painting the ceramic tile. While the process calls for some cautious preparation work, it's an easy project a beginner do-it-yourselfer can feel happy to tackling it.

Prepare Tile

In order for paint to switch to ceramic, you have to prepare the tile earlier than choosing up a brush. Cleaning the tile is primary, when you consider that residue from dust, grease and mildew can avoid the paint from properly adhering. Utilize a barely abrasive commercial tile cleaner to take away any grim that is probably on the surface of the tile. If mold is present, scrub the tile with bleach or hydrogen peroxide as well. Once the tile is fresh, sand it. Ceramic tile has a sleek finish that doesn’t grasp hold of paint fine; sanding the surface make texture that makes it easier for the paint to stick. Ensure to wipe down the tiles again to put off any sanding dirt before painting.

Pick the Right Products

The key to an easy, even finish on your ceramic kitchen tile is a good primer. Choose Rust-Oleum Tub & Tile Epoxy Paint to give an ideal surface for the paint to adhere to. An epoxy formula usually is the good choice because it gives the most stability, and you can top it with any kind of paint. When it comes to the paint itself, choose a high-gloss or semi-gloss formula. Latex usually dries rapidly, but it has a softer finish that can tear off if the floor is scratched. Oil-based paint takes longer to dry and is tougher to clean up, however its finish usually is more long lasting. If you’re painting the ceramic tile around your sink or on the floor, choose epoxy paint, which generally is the toughest.

Be Steady

When it comes to put on the paint, patience is needed. Don’t pile on a dense, heavy coat of paint in an attempt to finish faster; the heavier the layers, the much more likely the paint is to peel or tear off. Instead, apply several thin coats, making sure to let each layer to dry fully before adding the next. When you’re gratified with the tiles' coverage, let the paint to dry for two to three days. Once it’s fully healed, you can apply a few coats of a clear, water-based top coat to help defend the painted tile from moisture, scratches and other surface damage.

Tips

Some additional tips to keep in mind before painting ceramic tile:

  • To preserve the painted finish on a tile countertop, you may constantly require to utilize a cutting board. Knife and blades will simply scratch the paint of layer on ceramic tile.
  • The thing to keep in mind that never place hot pans on a painted ceramic tile counter. The warmth can cause the painted finish to bubble and peel.
  • The surface of your painted ceramic tile might be only as right as the base you paint over. If the sealant is cracked or broken, repair it in at least 48 hours ahead of painting day. If the tile is cracked or gouged, replace them or fill in the deficiencies.
  • It will take about two weeks for the paint to dry and cure very well. You should be easy-going so that the surface will last.
  • Preparation and cautious execution is critical to a successful activity. Take the time to clean, sand, dust, dry, and paint very sensibly.